Holts Emergency Repair Hose Weld Bandage
	Instructions for use: For splits in one piece hoses: 1. Clean damaged area around hose with emery paper provided. 2. Dry area as much as possible with a cloth. 3. Peel off protective strip from the back of the rubber bandage. 4. Wind bandage firmly around split hose making generous overlaps. 5. Fasten non-slip straps around each end of the bandage making sure that the serrated edge faces inwards towards bandage. Pull as tight as possible. When split is on a bend place the straps immediately over each end of the split. For splits at the weld of T pieces: Follow the above, ensuring the bandage completely covers the joint and is firmly wrapped around the hose. Fasten straps as tightly as possible around the joint as in diagram.