Forte

Online Store | Fuel | Additives |  Forte

Forte Diesel Particulate Filter Cleaner and Regenerator Forté Diesel Particulate Filter Cleaner and Regenerator will provide the following benefits: Aids passive regeneration of Diesel Particulate Filter Actively reduces soot emissions Improves stability of Diesel Particulate Filter systems Compatible with all diesel engines For diesel and bio diesel up to B30 Forté Diesel Particulate Filter Cleaner and Regenerator has been specifically formulated to combat the adverse effects that start/stop driving conditions have on Diesel Particulate Filter (DPF) regeneration. With a continued stop/start driving pattern, soot loading builds up in the DPF since the ECU is unable to make the necessary small adjustments to the fuel injection timing to increase the exhaust temperature and initiate regeneration. Forté DPF Cleaner and Regenerator uses a catalyst to adhere to the soot particles during combustion, lowering the temperature at which they can be burnt off. The soot particles will burn at lower temperatures in the soot filter area, helping to regenerate the filter, especially in cases where exhaust temperatures are low, like stop and go traffic, city traffic and short drives. Forté DPF Cleaner and Regenerator should be used at regular service intervals in conjunction with Forté Advanced Formula Diesel Treatment and when the symptoms indicate that treatment is necessary. Recommendation: Clean and lubricate the fuel system with Forté Advanced Formula Diesel Treatment during regular maintenance and add Forté DPF Cleaner and Regenerator to ensure efficient Diesel Particulate Filter operation. Compatible with all diesel engines Price: £14.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Advanced Formula Motor Flush For Professional Trade Use Only Forté Advanced Formula Motor Flush will provide the following benefits: •Clean engines internally and provide anti-wear protection •Free sticking piston rings, hydraulic valve lifters and variable valve timing systems •Remove lacquer, varnish and sludge deposits from the crankcase •Neutralise crankcase acids, keeping new oil cleaner, for longer Advanced Formula Motor Flush has been specifically formulated to combat the effects that extended oil drain periods and modern driving habits have on today's technically sophisticated engines. Urban cycle and start/stop driving patterns increase the rate at which acid builds up; leading to accelerated and premature engine wear. Excessive lacquer and varnish formation reduces the efficiency of oil system components, such as VVT systems, piston rings and Hydraulic Valve Lifters. Forté Advanced Formula Motor Flush is fully compatible with all engine components and engine oils which are formulated to meet API and ACEA Service Classifications and international motor manufacturers' specifications. It is essential that engines are flushed with Forté Advanced Formula Motor Flush at each service. Forté Advanced Formula Motor Flush is fully compatible with and will not affect wet clutches. Price: £11.45 Quantity:   Enter e-mail address to tell a friend about this item

Forte Power Steering Treatment For Professional Trade Use Only Forté Power Steering Treatment will provide the following performance benefits to power assisted steering fluids and systems: •Eliminate power assisted steering stiffness, shudder and noise •Provide smoother operation of power assisted steering •Maintain optimum performance of power assisted steering pump and load bearing components •Prevent and cure oil leaks •Reduce power steering fluid foaming Forté Power Steering Treatment is compatible with and will enhance the performance of all fluids recommended for use in power assisted steering systems. Forté Power Steering Treatment works to eliminate PAS stiffness, shudder and noise; prevents oil leaks and provides smoother operation of the power assisted steering. In addition, the treatment maintains optimum performance of the PAS pump and load bearing components by stabilising the PAS fluid. A combination of extended vehicle service intervals and the low priority given to servicing PAS systems by the motor manufacturers results in fluid deterioration and failing power assisted steering systems. Forté Power Steering Treatment meets the requirements or exceeds the test requirements of the commercial pump standards for manufacturers of pumps used by the automotive industry. Price: £13.45 Quantity:   Enter e-mail address to tell a friend about this item

Forte Air Conditioner Treatment For Professional Trade Use Only Forté Air Conditioner Treatment will provide the following benefits to air conditioning systems: •Destroy bacteria on the evaporator •Eliminate unpleasant odours emitted from air conditioning systems •Deodorise the passenger cabin •Provide a healthier environment for car occupants •Simple safe application Forté Air Conditioner Treatment is a preventative and curative treatment used to effectively eliminate mould, fungi and unpleasant odours that occur in air conditioning systems; typically when not used for a period of time. The method of application is simple, safe and non-labour intensive as there is no need for extension tubes, additional equipment or lengthy time input from technicians. Forté Air Conditioner Treatment does not contain solvent cleaning agents so is completely safe to use and will not affect any components, leather seats or wood and plastic trim. Price: £29.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Air Intake Cleaner Forté Air Intake Cleaner will provide the following performance benefits to air intake systems: •Remove contaminants which cause sticking of air intake mechanisms •Improve overall performance and idle speed quality •Restore correct air flow to improve air/fuel mixture formation •Contaminated EGR and idle speed control valves can be effectively cleaned to restore correct operation •Will not remove protective coatings on internal throttle body surfaces Forté Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components. These tar-like deposits build up on the idle speed control and butterfly valves, leading to irregular airflow, lumpy tickover and poor driveability. For ease of application, the nozzle is designed to operate through 360°, enabling a thorough clean in hard to reach places. Forté Air Intake Cleaner is specifically formulated for modern vehicles. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Rust Penetrant For Professional Trade Use Only Release seized and corroded components When used as directed, Forté Rust Penetrant will provide the following performance benefits: •Loosen rusted and seized moving parts •Provide long lasting lubrication •Displace moisture •Form a temporary anti-corrosive coating •Provide lubricity and load-bearing resistance •Contains PTFE Forté Rust Penetrant is a multi-purpose lubricant with dewatering, penetrating and corrosion inhibition properties. It can be used on all ferrous metals as a general purpose lubricant. It is specifically designed to release seized and corroded components, as a general purpose light duty lubricant, a dewatering fluid or as a temporary anti-corrosive coating. Application: Spray directly on to the component or surface from a distance of 15 to 30cm and allow to penetrate, or form a film. For precise application, attach the extension tube provided. Price: £9.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Copper Grease For Professional Trade Use Only Reduce dismantling times by preventing seizure When used as directed, Forté Copper Grease will provide the following performance benefits: •Prevent seizing on components such as brake calipers •Enable fast and easy dismantling of threaded components •Provide anti-seize properties under saturated conditions •Exceptional salt water corrosion resistance •Allow easy reuse of disassembled components •Does not melt or drip Forté Copper Grease is a lead-free, multi-purpose, anti-seize compound that can be used on all types of threaded components, flanges or other components that are exposed to temperatures up to 1,100°C, where it will reduce assembly/ dismantling times. It will also protect against seizure caused by corrosion and chemical attack and can be used extensively as a brake caliper antiseize compound. Application: Spray sparingly onto the component from a distance of 25 to 30cm, ensuring a thin, even coating, prior to assembly. For optimum properties, ensure that both contact surfaces are completely coated Price: £9.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte White Grease For Professional Trade Use Only Lubricate moving parts When used as directed, Forté White Grease will provide the following performance benefits: •Lubrication of moving contact parts •Contains water repellent solid lubricants •Prevention of seizure, particularly under aqueous conditions •Will operate through a wide temperature range of -25 to +140°C •Good oxidation resistance •Contains PTFE Forté White Grease is a quality grease which contains no water and is designed for lubricating moving contact parts, including locks, hinges, catches, threaded components, flanges, bearings, gears and cogs. It can be used for applications exposed to aqueous environments. Application: Spray sparingly onto the component from a distance of 25 to 30cm. For precise application, attach the extension tube provided to ensure an even coating. This product is a thin liquid which dries to a viscous, tacky, lubricating film. Price: £9.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Electrical Cleaner & Degreser For Professional Trade Use Only Clean and degrease electrical components When used as directed, Forté Electrical Cleaner and Degreaser will provide the following performance benefits: •Thoroughly clean electrical surfaces and components •Dissolve oils and greases •Virtually instantaneous evaporation •Residue-free Forté Electrical Cleaner and Degreaser is a light duty cleaner and degreaser primarily for electrical equipment and electronic components and can be used on any metallic and most plastic components for the removal of dirt, greases and oils. Application: Apply liberally, directly to the surface from a distance of 15 to 20cm. Allow to evaporate, wiping away any excess with a clean dry cloth. Ensure complete evaporation prior to reconnecting to the power supply. Ensure all vapours have been removed from the area. Always dispose of contaminated materials in a sealable metal bin to prevent fire risk. Always work under well-ventilated conditions, taking care to avoid vapour inhalation. N.B. Always isolate all electrical equipment Price: £9.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Clear and Protect For Professional Trade Use Only Extended service intervals as well as short start-stop journeys are affecting the efficiency and performance of engine oils. Although oils are designed to last between service intervals, they become contaminated and break down, says Forté. The UK’s leading treatments company has identified several causes for this: some old oil may remain in the system, therefore contaminating fresh product added during servicing; driving styles can seriously hamper the performance of the formulation; and short journeys mean that the oil does not get up to optimum operating temperature and is constantly stressed. The results of oil breakdown are far-reaching and can be costly to rectify with varnishing, lacquering and sludge build up affecting important engine components. Forté has proactively developed a “Clean & Protect Programme” for garages and service workshops that ensures engines are fully protected from one service to the next, with oil maintaining optimum stability throughout. This is great news for garages because for the first time ever they can provide an enhanced front line defence mechanism to oil breakdown. Forté Clean & Protect comprises a two stage treatment. First the engine is cleansed with Advanced Formula Motor Flush. This removes all contaminants and ensures that the residual oil is neutralised of any acids. Even when an engine is flushed we still retain up to 15% of the old oil, the difference being it has been neutralised of its acid. The system is then ready to receive fresh oil together with Oil System Protector to enhance oil performance and helping to prevent the breakdown of oil from one service to the next. Oil System Protector is a special formulation that improves oil stability and dramatically reduces lacquer and varnish formation. This in turn prevents oil burning and reduces valve train wear. It also prevents – and eliminates hydraulic valve noise and ensures that variable valve timing systems work freely and smoothly. The Clean & Protect Programme can be enhanced further by adding Forte’s Advanced Formula Diesel Treatment or Advanced Formula Gas Treatment. With this thorough, detailed approach to engine servicing, garages can keep the engine clean and the oil system in tip-top condition between services Price: £24.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Silicone Lubricant For Professional Trade Use Only Multi-Purpose Lubricant When used as directed, Forté Silicone Lubricant will provide the following performance benefits: •Prevent squeaks and creaks in areas such as window and sunroof seals •Will leave a transparent lubricating coating •Provide protection to electrical components •Water repellent •Slow release properties •Operate across a wide temperature range Forté Silicone Lubricant is an inert and colourless multi-purpose silicone lubricant for general purpose use. It affords improved high temperature performance on almost all metals and plastics. It is not recommended for use on areas such as foot pedals and steering wheels where slippage may occur. Application Spray evenly on to the component, from a distance of 15 to 30cm. Remove all excess with a clean dry cloth. Price: £9.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Oil Fortifier For Professional Trade Use Only When Forté Oil Fortifier is added to the engine oil, it will provide the following performance benefits: •Reduce oil consumption in engines showing signs of wear •Minimise exhaust smoking by providing better piston ring sealing •Restore performance to tired engines •Improve oil pressure to better protect moving parts Forté Oil Fortifier has been tested in a wide variety of high mileage engines. This has proven the reliability of the product in restoring performance and greatly extending the life of engines far beyond the stage where they would have required extensive repairs or a complete overhaul. Forté Oil Fortifier is recommended for use in engines of older or higher mileage vehicles which are showing signs of wear; evidenced by high oil consumption or excessive exhaust smoking. Forté Oil Fortifier is compatible with all crankcase fill oils, including fully synthetic, which meet the specification of API and ACEA classifications. Forté Oil Fortifier is not recommended for use in engines incorporating wet clutches. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Cooling System Conditioner For Professional Trade Use Only Forté Cooling System Conditioner will provide the following benefits: •Prevent scale formation and corrosion on the heat transfer surfaces which will ensure efficient cooling system operation •Eliminate oxygen from the cooling system. Oxygen is a major cause of corrosion •Prevent electrolytic corrosion and cavitation erosion •Provide water pump impeller shaft lubrication As recommended by Valeo, Forté Cooling System Conditioner is a complex blend of inorganic chemicals and corrosion inhibitors which ensures that the cooling system operates efficiently and stay trouble-free over an extended period of time. Forté Cooling System Conditioner is compatible with all coolants including OAT coolant and is not harmful to any component in the cooling system. Forté Cooling System Conditioner is a preventive maintenance product which will only be of benefit in preventing cooling system failure if it is added to a clean cooling system which is free of scale and corrosion. It is recommended that the cooling systems of automotive vehicles be flushed out with Forté Cooling System Flush prior to adding Forté Cooling System Conditioner to the system. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Automatic Transmission Treatment For Professional Trade Use Only Forté Automatic Transmission Treatment will provide the following performance benefits to automatic transmission fluids used in a variety of automotive and off-road equipment: •Smoother operation and gear changing •Reduce harsh take up and flaring •Maintain fluid efficiency over a wide temperature range •Prevent wear and extend the life of the transmission unit •Prevent leaks by maintaining seal condition Forté Automatic Transmission Treatment is compatible with and will enhance the performance of all automatic transmission gearboxes. Forté Automatic Transmission Treatment will also enhance the performance of fluids recommended for use in Continuously Variable Transmissions. Forté Automatic Transmission Treatment is the recommended treatment for hydraulic systems using LHM fluid, such as Citroën - particularly for conditioning the rubber seal between the hydraulic fluid pipe and gas globe. Forté Automatic Transmission Treatment is also compatible with crankcase oils and can be used to treat manual gearboxes filled with crankcase oil to overcome 'notchy' gear change. Price: £15.99 Quantity:   Enter e-mail address to tell a friend about this item

Forte Diff and Gear Treatment For Professional Trade Use Only Forté Diff and Gear Treatment provides the following performance benefits to automotive manual gearboxes, differentials and a variety of industrial and other gearboxes, including four-wheel drive transfer units: •Quieten gearbox and differential noise and allow smoother gear changes •Reduce gear friction and decrease operating temperatures •Reduce gear tooth wear and extend the operating life of the gearbox, differential and transfer box •Improve chemical and shear stability of the oil so that long term efficient functioning of the gearbox is ensured Forté Diff and Gear Treatment is a fully balanced supplementary gear oil package which is scientifically formulated using the latest technology to provide the listed benefits to gearboxes and differentials in a wide variety of automotive and industrial equipment. Forté Diff and Gear Treatment is compatible with all gear oils formulated to meet the requirements of international vehicle manufacturers’ specifications for extreme pressure gear oils. Forté Diff and Gear Treatment is also recommended for use in limited-slip differentials. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Seal Conditioner For Professional Trade Use Only Forté Seal Conditioner will provide the following benefits in automotive engines, manual gearboxes and final drive differentials, hydraulic and other industrial equipment where oil leaks have occured: •Reduce oil burning and exhaust smoking in vehicles where oil is leaking past the valve stem seals •Reduce unsightly leaks from camshaft and crankshaft oil seals •Reduce oil leaking from seals in a wide variety of automotive equipment •Ideal for used car preparation Forté Seal Conditioner is a synthetic seal treatment which restores the elastomer properties to seals. A major cause of oil burning and exhaust smoking in automotive engines is due to the valve stem seals hardening and shrinking, which results in oil leaking past these seals into the combustion chambers. This condition can be treated by adding Forté Seal Conditioner to the crankcase oil. Forté Seal Conditioner is compatible with all conventional crankcase and gear oils, including fully synthetic and semi-synthetic engine and gear oils. Forté Seal Conditioner is not compatible with aqueous and non-petroleum oil-based fluids. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Cooling System Flush For Professional Trade Use Only Forté Cooling System Flush will provide the following performance benefits: •Dissolve and loosen scale and rust build up from the internal surfaces of the radiator and water jacket of the engine •Restore heater efficiency caused by poor circulation •Restore cooling system efficiency to operate at designed temperature •Remove the gel formed when Mono Ethylene Glycol-based antifreeze and OAT coolant is mixed Forté Cooling System Flush is a blend of inorganic acids and inhibitors designed to remove scale and rust build up from the cooling system. Forté Cooling System Flush will not damage any cooling system components when used as directed and is compatible with all glycol-based antifreeze formulations and OAT coolants. In order to maintain optimum cooling system efficiency and engine performance, it is recommended that the cooling systems of automotive vehicles be flushed out with Forté Cooling System Flush at least once every year. Note: Forté Cooling System Conditioner should be added to the coolant when refilling the cooling system to ensure ongoing protection against corrosion and scale build-up. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Bio Degreaser For Professional Trade Use Only Forté Bio Degreaser will provide the following benefits: •Remove emulsified oil from cooling systems following cylinder head gasket and oil cooler failure •Remove blockages from radiator and heater matrix where oil has emulsified •Remove residue left from combustion gases permeating through cylinder head •Drastically cut component costs and reduce down-time •Will not damage plastic water pump impellers Forté Bio Forté Bio Degreaser is a biodegradable heavy-duty cleaner/degreaser free of petroleum or chlorinated solvents. It effectively removes oil and grease deposits from the internal surfaces of automotive cooling systems and restores heat transfer efficiency to allow the engine to run at designed operating temperature; thus reducing heat-related problems and engine failure. Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Radiator Stop Leak For Professional Trade Use Only Forté Radiator Stop Leak will provide the following performance benefits: •Effect emergency cooling system repairs to prevent loss of coolant •Keep vehicles on the road until the replacement components become available •Enable extended trips to be completed without costly repairs or wasted time in the event of a cooling system leak •Allow commercial vehicles to complete round trips and get back to their base to carry out repairs in the event of cooling system leakage whilst on a trip Forté Radiator Stop Leak is a unique blend of natural fibres and surface active agents which combine to plug hairline cracks and pinholes in the radiators and cooling systems of motor vehicles. When used as directed, Forté Radiator Stop Leak will not cause any blockage of the radiator cores or heater matrix; nor will it harm any cooling system components. Forté Radiator Stop Leak is compatible with all Mono Ethylene Glycol-based and OAT coolants. It is recommended that Forté Radiator Stop Leak is carried in recovery vehicles as an essential emergency repair item Price: £12.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Advanced Formula Diesel Treatment For Professional Trade Use Only Forté Advanced Formula Diesel Treatment is a multi-functional diesel fuel treatment which will provide the following performance benefits to all diesel engines: •Reduce black smoke emissions •Restore injector spray patterns •Improve engine performance and response •Maintain EGR valve and variable vane turbo cleanliness •Lubricate and extend the life of injectors and fuel pump Forté Advanced Formula Diesel Treatment has been specifically formulated to combat driveability concerns caused by the by-products of combustion and the adverse effects of fuel degradation. Forté Advanced Formula Diesel Treatment cleans and lubricates the whole of the fuel system both pre and post-combustion. It improves overall engine power and efficiency, as well as considerably reducing costly down time and component replacement in direct and indirect injection engines. Forté Advanced Formula Diesel Treatment is compatible with common rail direct injection and Pumpe Duse diesel engines. Forté Advanced Formula Diesel Treatment does not affect the cetane rating of diesel fuel. Price: £13.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Specialist Injector Cleaner For Professional Trade Use On Forté Specialist Injector Cleaner will provide the following benefits to all petrol engines: •Reduce exhaust emissions •Remove injector pintle deposits to restore fuel flow •Improve fuel economy and overall engine performance •Neutralise acids and dissolve lacquers from the fuel system Forté Specialist Injector Cleaner is a complex blend of specially selected cleaning agents which act together to dissolve deposits that are formed in fuel systems which restrict the efficient delivery of fuel to the combustion chambers. Forté Specialist Injector Cleaner is compatible with all fuel system and engine components, including lambda sensors and catalytic converters. Forté Specialist Injector Cleaner should be used at regular service intervals or whenever symptoms indicate that treatment is necessary. Price: £14.95 Quantity:   Enter e-mail address to tell a friend about this item

Forte Advanced Formula Gas Treatment For Professional Trade Use Only Forté Advanced Formula Gas Treatment will provide the following performance benefits to all petrol engines. •Free sticking valves and piston rings •Reduce exhaust emissions •Maintain oxygen sensor and EGR valve cleanliness •Improve engine performance and driveability Forté Advanced Formula Gas Treatment has been specifically formulated to combat driveability concerns caused by contamination and the adverse effects of fuel degradation. Forté Advanced Formula Gas Treatment cleans and lubricates the entire fuel system, both pre and post-combustion. The treatment is completely safe with all fuel system components including catalytic converters and oxygen sensors. Forté Advanced Formula Gas Treatment is compatible with High Pressure Direct Injection petrol engines. Forté Advanced Formula Gas Treatment should be used at each service or whenever symptoms indicate that treatment is necessary. Price: £11.45 Quantity:   Enter e-mail address to tell a friend about this item

Online Store | Fuel | Additives |  Forte